Bonjour,
Mon français et ecrit n'est pas bon.. I hope it's not a problem to talk English. If you want to comment in French; it really isn't a problem; I can speak it a little bit, but I luckly understand it better when it's written.
It's a long time ago that I've posted over here, but I wanted to show some creations that I've made the last year. The first in this line is the Clayson 8070. The basic model was the NH from JadiToys, I completely modificated it; made a new cabin out of Vivak plate, changed the plate work of the harvester, made a new header from a UH header; but with the original New Holland Clayson plates on it; I wanted to make it so realistic as possible. Also the rear axle is completely build out of scratch material, and the intake is made moveable with hydraulic rams.
And of course; the header is made detachable.
I hope you enjoy it!
If you want to see some building pictures; please ask; I will upload them asap.
Niels
Modification - Moissonneuse New Holland Clayson 8070
-
- Membre
- Messages : 44
- Enregistré le : 30 août 2009, 12:22
- Contact :
-
- Membre
- Messages : 880
- Enregistré le : 15 mars 2009, 20:54
-
- Membre
- Messages : 18
- Enregistré le : 07 juil. 2013, 12:50
Modification - Clayson NH 8070
Magnifique!!!!
Have you of the other one photos of the parts(parties) than you modified and various stages of the works?
Cordially.
Avez-vous d'autre photos des parties que vous avez modifié et des différentes étapes des travaux?
Cordialement.
Laurent
Have you of the other one photos of the parts(parties) than you modified and various stages of the works?
Cordially.
Avez-vous d'autre photos des parties que vous avez modifié et des différentes étapes des travaux?
Cordialement.
Laurent
-
- Membre
- Messages : 44
- Enregistré le : 30 août 2009, 12:22
- Contact :
Re: Modification - Clayson NH 8070
Thanks for your great replies!
No problem!
Finished with the Vivak in place; combine still without clear coat.
And the finishing of the header.
If you want more; please ask.
No problem!
Finished with the Vivak in place; combine still without clear coat.
And the finishing of the header.
If you want more; please ask.
-
- Membre
- Messages : 44
- Enregistré le : 30 août 2009, 12:22
- Contact :
Re: Modification - Moissonneuse New Holland Clayson 8070
Thanks for the kind comments!
@Renaud M; Thank you again! It was nice to see you, and the picture you made is great!
The pictures without the sticker on the header are the old pictures, luckily they're still on it, ha ha. Only need to replace the work light on the side; a very small job luckily.
@Renaud M; Thank you again! It was nice to see you, and the picture you made is great!
The pictures without the sticker on the header are the old pictures, luckily they're still on it, ha ha. Only need to replace the work light on the side; a very small job luckily.