Sujet global - Vos modifications de MACHINES MOTORISÉES
Re: Vos modifications de MACHINES MOTORISÉES
Ah bon un voisin ?
Tu y fais quoi du coup ? juste la peinture ?
Antoine tant que t'es à fond dans les cueilleurs je vais t'envoyer un Geringhoff à finir, comme ça tu ne seras pas coupé dans ton élan
Tu y fais quoi du coup ? juste la peinture ?
Antoine tant que t'es à fond dans les cueilleurs je vais t'envoyer un Geringhoff à finir, comme ça tu ne seras pas coupé dans ton élan
Since 06/02/2005
Re: Vos modifications de MACHINES MOTORISÉES
un conseil pour ma lexion 600 je voudrai mettre des pneus plus large
Re: Vos modifications de MACHINES MOTORISÉES
oui, les bec a maïs cat sont en vente, sur t-toys..
Re: Vos modifications de MACHINES MOTORISÉES
Ce sont des artisanaux qui sont faits par farmmodels.nl
Re: Vos modifications de MACHINES MOTORISÉES
et mieux finis!
Re: Vos modifications de MACHINES MOTORISÉES
C'est vrai que cela lui donne un air plus musclé, cela me donne des idées pour la mienne et les becs lui vont a merveille.
- mimain5598
- Membre
- Messages : 2661
- Enregistré le : 30 juin 2011, 18:48
- Votre département : 62 - Pas-de-Calais
Re: Vos modifications de MACHINES MOTORISÉES
Vite , vite
Re: Vos modifications de MACHINES MOTORISÉES
C'est bien tu ma écouté
J'aime bien mangé épicé. Mais pas les deux en même temps !
Re: Vos modifications de MACHINES MOTORISÉES
ptitdrummer a écrit :rafraichis moi la mémoire ?
florian76 a écrit :Si tu veux j'ai une 770tt a peindre si tu as trop de jaune, ça évitera de payer 400€ le pot de peinture
J'aime bien mangé épicé. Mais pas les deux en même temps !
-
- Membre
- Messages : 95
- Enregistré le : 17 déc. 2012, 00:09
-
- Membre
- Messages : 20
- Enregistré le : 29 avr. 2013, 18:01
Re: Vos modifications de MACHINES MOTORISÉES
moi j ai fait une légère modif qui rend asser bien
- Fichiers joints
-
- ensileuse.jpg (154.33 Kio) Vu 5327 fois
c'est en forgeant que l on devient forgeron
-
- Membre
- Messages : 762
- Enregistré le : 28 janv. 2012, 13:37
Re: Vos modifications de MACHINES MOTORISÉES
Trop épais et mal collé, refais ça propre bonhomme et ce sera parfait Bonne idée
29 et oué !
-
- Membre
- Messages : 20
- Enregistré le : 29 avr. 2013, 18:01
Re: Vos modifications de MACHINES MOTORISÉES
je sais que pour le panneau convoi il est a refaire
c'est en forgeant que l on devient forgeron
-
- Membre
- Messages : 762
- Enregistré le : 28 janv. 2012, 13:37
Re: Vos modifications de MACHINES MOTORISÉES
Trouve une chaîne plus petite aussi, si tu as un homme au 1/32éme mets le à côté tu verras
29 et oué !
-
- Membre
- Messages : 76
- Enregistré le : 03 sept. 2008, 10:58
Re: Vos modifications de MACHINES MOTORISÉES
Petites modifications sur ma CR9090 UH. montage des roues avant de la CX Britains,retros du xerion,coupe passée en 7,50m.
- Fichiers joints
-
- IMG_0320.JPG (123.57 Kio) Vu 4842 fois
- jd-ih du 22
- Membre
- Messages : 1045
- Enregistré le : 10 janv. 2012, 18:26
Re: Vos modifications de MACHINES MOTORISÉES
Superbe!
Sa change des grosses coupes!
Sa change des grosses coupes!
-
- Membre
- Messages : 1704
- Enregistré le : 03 sept. 2008, 10:58
Re: Vos modifications de MACHINES MOTORISÉES
pourquoi le choix d'une coupe de 7m50 sur une tel machine ? débit de chantier ?
Ma page photos Facebook Pixmachinery76
Likez, regardez, partagez SVP https://www.facebook.com/pages/Pixmachi ... 8016193993
et la Flickr : https://www.flickr.com/photos/122456155 ... 654255265/
Likez, regardez, partagez SVP https://www.facebook.com/pages/Pixmachi ... 8016193993
et la Flickr : https://www.flickr.com/photos/122456155 ... 654255265/
norscot claas lexion 580
my modifacation of norscots claas lexion 580,numberpate holder and numerplate and numberplate lights,made from a cable tie and plastruct for the lights,all decals by henri walker
- Fichiers joints
-
- claas lexion 580 001.JPG (127.8 Kio) Vu 4050 fois
-
- claas lexion 580 002.JPG (161.33 Kio) Vu 4050 fois
-
- numberplate 001.JPG (137.92 Kio) Vu 4050 fois
-
- numberplate 002.JPG (133.12 Kio) Vu 4050 fois
Re: norscot claas lexion 580
roof aerial added
- Fichiers joints
-
- claas 008.JPG (149.65 Kio) Vu 4048 fois
Re: norscot claas lexion 580
i am replacing the horrible norscot front wheels with uh fendt 820 wheels and using the norscot tyres,i will paint the rear wheel centres and wheel nuts
- Fichiers joints
-
- post-1769-0-63320500-1391256434.jpg (169.07 Kio) Vu 4237 fois
-
- claas 003.JPG (171.79 Kio) Vu 4237 fois
Re: norscot claas lexion 580
norscot did not do the steps correctly ,so a bit of black paint on the bottom step
- Fichiers joints
-
- claas 006.JPG (146.37 Kio) Vu 4886 fois
-
- claas 007.JPG (128.62 Kio) Vu 4886 fois
Re: norscot claas lexion 580
company telephone number added
- Fichiers joints
-
- claas lexion 580 003.JPG (122.01 Kio) Vu 4899 fois
Re: norscot claas lexion 580
i will be doing some work to the header and adding decals,the claas decal is in the wrong place,i will be adding V750 auto contour decals and adding hydraulic hoses
- Fichiers joints
-
- 1854663.jpg (42.25 Kio) Vu 4897 fois
-
- claas 005.JPG (135.11 Kio) Vu 4897 fois
Re: Vos modifications de MACHINES MOTORISÉES
a litle bit more done today,i have removed the wrongly positioned claas decals,to get them off i used a product called T-cut,then applied the new claas decals in the right place
- Fichiers joints
-
- lexion 580 008.JPG (162.26 Kio) Vu 4694 fois
-
- lexion 580 009.JPG (159.35 Kio) Vu 4694 fois
-
- header decals 001.JPG (144.31 Kio) Vu 4694 fois
-
- header decals 002.JPG (146.55 Kio) Vu 4694 fois
Re: Vos modifications de MACHINES MOTORISÉES
most people know that on this model the unloading auger never opened to its full unloading position,so took the combine apart and altered the auger so it swings fully out,also painted the end of the auger matt black,as on the real combine,norscot painted it gloss black,another little error from norscot
- Fichiers joints
-
- lexion 580 001.JPG (207.79 Kio) Vu 4687 fois
-
- lexion 580 002.JPG (184.64 Kio) Vu 4687 fois
Re: Vos modifications de MACHINES MOTORISÉES
rear wheel centres and wheel nuts painted
- Fichiers joints
-
- lexion 580 004.JPG (141.06 Kio) Vu 4686 fois
-
- lexion 580 006.JPG (144.99 Kio) Vu 4686 fois
Re: Vos modifications de MACHINES MOTORISÉES
overall pictures of the uh fendt 820 wheels with the original norscot front tyres,new front axle made with 3mm piano wire,the combine sits nicely now
- Fichiers joints
-
- lexion 580 003.JPG (176.05 Kio) Vu 4685 fois
-
- lexion 580 005.JPG (190.52 Kio) Vu 4685 fois
-
- lexion 580 007.JPG (181.46 Kio) Vu 4685 fois
Re: Vos modifications de MACHINES MOTORISÉES
any questions or comments please ask
Re: Vos modifications de MACHINES MOTORISÉES
Pas intérêt de faire tomber la vitrine labergue a écrit :voila je poste c'est 2 photos pour remercier "ptitdrummer" pour son travail remarquable concernant le bec conspeed repeint aux couleurs caterpillar,magnifique merci encore
Re: Vos modifications de MACHINES MOTORISÉES
more decals added to the lexion
- Fichiers joints
-
- cropmech decals 001.JPG (157.64 Kio) Vu 6065 fois
-
- cropmech decals 002.JPG (154.62 Kio) Vu 6065 fois
-
- 315.JPG (121.73 Kio) Vu 6062 fois
Re: Vos modifications de MACHINES MOTORISÉES
can any of you guys on this forum help me,PMA 32 sell grain tank lids for this model their website say it is out of stock,i have emailed PMA 32 but i dont get any replys,are they still in buisness?
Re: Vos modifications de MACHINES MOTORISÉES
please,can anybody help me with availability of the pma 32 grain tank?
Re: Vos modifications de MACHINES MOTORISÉES
is there not one person on this forum that can help me?
Re: Vos modifications de MACHINES MOTORISÉES
merci for replying,i have emailed pma,but not getting any replysagri du 85 a écrit :contact Renaud M
Re: Vos modifications de MACHINES MOTORISÉES
V750 decals from Henri Walker just applied
- Fichiers joints
-
- lexion 001.JPG (125.49 Kio) Vu 5653 fois
-
- lexion 002.JPG (133.85 Kio) Vu 5653 fois
Re: Vos modifications de MACHINES MOTORISÉES
!!!! J'achete !!!!
Re: Vos modifications de MACHINES MOTORISÉES
Tu es passé de la 770 à la 780?
Re: Vos modifications de MACHINES MOTORISÉES
J'ai hâte de voir les photos!!!!!
-
- Membre
- Messages : 1027
- Enregistré le : 02 juin 2009, 19:51
Re: Vos modifications de MACHINES MOTORISÉES
Ca ressemble a un xerion ...
6 futs, 6 caisses, les mains entre les caisses et les doigts dans le trou du fut.
Re: Vos modifications de MACHINES MOTORISÉES
hydraulic pipes added
- Fichiers joints
-
- lexion header 001.JPG (138.27 Kio) Vu 5066 fois
-
- lexion header 002.JPG (142.67 Kio) Vu 5066 fois
-
- lexion header 003.JPG (141.66 Kio) Vu 5066 fois
-
- lexion header 004.JPG (156.58 Kio) Vu 5066 fois